3M Elipar Deepcure Light Cure Unit - Plastic Housing (Elipar-L)

The 3M Elipar Deepcure Light Cure Unit - Plastic Housing (Elipar-L) is a state-of-the-art dental curing light engineered for modern restorative dentistry. This unit is equipped with advanced features to ensure efficient and reliable polymerization of light-cured dental materials. It features DeepCure technology, which enhances the depth of cure for light-activated materials, promoting thorough polymerization even in deep and challenging restorations.

This model features a lightweight plastic housing, offering high performance in a lighter design. The unit provides a broad spectral output, compatible with a variety of dental materials and specifically with campherquinone- and Ivocerin-based photoinitiators, allowing for effective curing across a range of restorative and adhesive materials. Both the plastic and stainless steel versions of the Elipar DeepCure LED Curing Light offer identical technical performance.

The 3M Elipar Deepcure Light Cure Unit is designed and tested in accordance with relevant EMC regulations and standards, conforming to legal requirements, and is classified as a medical electrical device in accordance with IEC 60601-1.

Key Features : 

DeepCure technology enhances the depth of cure, ensuring thorough polymerization of light-activated materials, even in deep cavities.
Broad spectral output ranging from 430–480 nm, compatible with a variety of light-curing dental materials and photoinitiators.
Intuitive two-button and single-mode operation with pre-set cure times of 5, 10, 15, and 20 seconds, as well as continuous (120 sec.) and tack-cure modes.
Features a lightweight plastic housing for comfortable handling.
Conforms to IEC 60601-1 as a medical electrical device and complies with relevant EMC regulations and standards.

Preparation: Ensure the device is fully charged before use. Verify that the light guide is clean and securely attached to the handpiece. Power On: Press the power button on the handpiece to turn on the device. Select Exposure Time: Choose the appropriate exposure time setting for the dental material being cured: 5, 10, 15, or 20 seconds, continuous mode (120 seconds), or tack-cure mode (1 second). Positioning: Direct the light beam towards the area requiring treatment, maintaining a safe distance from oral tissues. Curing Process: Hold the handpiece steady and activate the curing light. Ensure proper illumination of the treatment area throughout the selected exposure time. Post-Curing: After curing, deactivate the light and remove the handpiece from the treatment area. Repeat or Adjust: Repeat the process for additional curing as necessary or adjust the exposure time based on clinical judgment. Power Off: Turn off the device by pressing the power button on the handpiece. Charging: Recharge the handpiece by connecting it to the charger when the battery power level indicator shows a steady red light. Maintenance: Clean the light guide and handpiece regularly as per the manufacturer's instructions to maintain optimal performance. Storage: Store the device in a safe and clean environment, placing the handpiece on a flat surface when not in use. Safety Precautions: Follow all safety instructions provided in the user manual to prevent injury or damage. Use appropriate protective equipment such as goggles to shield eyes from intense light.