Dentsply X-Smart Endomotor

The Dentsply X-Smart Endomotor is an endodontic micro-motor specifically designed to drive NiTi rotary instruments for mechanical preparation of the root canal and cavity. This compact and lightweight unit is intended for use in hospital environments, clinics, or dental offices by qualified dental personnel. It offers operational flexibility by functioning on either battery or electrical power.

The X-Smart Endomotor provides precise control during endodontic procedures with variable speed settings and torque control. It features a speed range of 120 to 800 RPM and a torque range of 0.6 to 5.2 Ncm. The motor is supplied with a 16:1 contra-angle and includes nine adjustable program selections for tailored treatment.

Key Features : 

Supports rotary motion for NiTi instruments, ensuring precise root canal preparation.
Offers a speed range of 120 to 800 RPM and a torque range of 0.6 to 5.2 Ncm for controlled clinical workflow.
Compatible with various NiTi rotary instruments, including ProSystem GT® Rotary, ProFile® GT® Rotary, and ProTaper® Universal Rotary systems.

Align the B mark on the cord plug of the motor handpiece with the S mark on the motor handpiece connector.
Insert the plug into the connector and ensure a secure connection.
If using an AC adapter, connect it to the power connector with the B mark facing downward.
Optionally, if using a foot pedal, securely insert its plug into the foot pedal connector with the S mark facing downward.
If you prefer not to use the foot pedal, you can operate the device without it.
To connect the contra-angle head, align the positioning pins of the head with the positioning slots on the motor handpiece.
Insert the head until it clicks into place.
When inserting a file into the chuck, push it in until it stops and lightly turn it until it engages with the latch mechanism. Push inward to ensure a secure click.
To remove the file, depress the push-button and pull it out.
The motor handpiece will start in reverse and automatically switch to forward rotation when the load is removed.
To stop the motor handpiece, press the ON/OFF button or release the foot pedal (if connected).
If desired, lubricate the contra-angle head following the manufacturer's instructions. Avoid lubricating before autoclaving.
Refer to the user manual for further information and specific guidelines.

1 Years