Fluke Impulse 7000DP Defibrillator Tester

In stock
SKU
MBTTI0002
Specification " Temperature, Operating :10 °C to 40 °C (50 °F to 104 °F) " Temperature, Storage: -20 °C to +60 °C (-4 °F to +140 °F) " Humidity: 10 % to 90 % non-condensing " Display: LCD display " Communications : USB device port for computer control " Modes of Operation : Manual and remote " Power: Internal rechargeable NiMH battery pack for nine hours (typical) operation after full charge or the battery charger can operate the analyzer and charge the battery simultaneously " Battery Charger : 100 V to 240 V input, 15 V/1.5 V A output. For best performance, the battery charger should be connected to a properly grounded ac receptacle " Enclosure: ABS plastic housing " Dimensions: 32 cm x 24 cm x 13 cm (13 in x 9.5 in x 5 in) " Weight :3.02 kg (6.6 lb, 0.1 oz) " Safety Standards : CE: IEC/EN61010-1 2nd Edition; Pollution degree 2 CAN/CSA-C22.2 No. 61010-1; UL61010-1 C-Tick: Australian EMC
Fluke Impulse 7000DP Defibrillator Tester
Fluke Impulse 7000DP Defibrillator Tester
Feature " IEC 60601-2-4 Compliance " Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility " AED compatibility " 12-lead ECG simulation " Internal pacer brand selections " Flexible heart-rate settings (1BPM step) " DSP-based measurements for firmware and waveform upgrade " Waveform capture, store and replay " First-in-class accuracy ± 1% of reading + 0.1J " Long lasting, rechargeable battery
Write Your Own Review
You're reviewing:Fluke Impulse 7000DP Defibrillator Tester
Your Rating

WhatsApp chat

WhatsApp chat