Labtop PLC Controlled Plant Growth Chamber LGC-200GP
In stock
SKU
MBLAB0228
Product Overview:
- Labtop PLC Controlled Plant Growth Chamber is used to closely monitor temperature, humidity and light intensity on the drug and drug substance.
Specifications:
| Catalogue Number | LGC- 200GP |
|---|---|
| GMP Model | Inner Stainless Steel 316, 0.8 mm & Outer Stainless Steel,1.0 mm |
| Capacity | 200 Liters |
| Internal Size | 50x40x100 (WxDxH) cm |
| External Size | 65x72x169 (WxDxH) cm |
| No. Of Doors | Single |
| No. Of Trays | 3.0 |
| Trays | Stainless Steel Perforated Trays |
| Insulation | 3 Inch Thick CFC Free PUF Insulation |
| Validation Port | 50 mm Validation Port Hole |
| Power | Works On 230V AC Single Phase 50Hz |
| Temperature Range | 10° C To 60° C |
| Temperature Accuracy | ± 0.2° C |
| Temperature Uniformity | 2° C |
| Humidity Range | 40% RH To 98% RH |
| Humidity Accuracy | ± 2% RH |
| Humidity Uniformity | ± 3% RH |
| Photo Effect | Fluorescent Tubes For Day Light Effect |
- PLC with PID controller (auto-tune), safety controller
- Auto changeover of standby systems & other event managements
- 38 Inch color HMI with touch screen
- USB printing port and ethernet connectivity
- Two chamber blowers to have uniformity of temperature under loaded condition (above 400 liters)
- Audio visual alarm if the temperature deviates from the preset temperature
- U shaped SS nichrome wire air heaters
- Inside see through unbreakable acrylic door
- Hermetically sealed CFC free danfoss/emerson compressor
- R 134a refrigerant having state of art by pass system for continues run of compressor
- Non-condensing type steam injection system
- Water level arrangement with insulation to save heat energy
- Silicon rubber seal to insert sensors for validation purpose
- Accessories:
- Castor wheels, MCB, adjustable tray height arrangement, heavy-duty latch with lock & key
- Safety features:
- Float switch to cut off the mains supply in case of low water level in the boiler tank
- Additional safety thermostat to cut off the boiler system in case of overshoot of temperature
- 180 Sec compressor on delay timer to safeguard the compressor
- Optional accessories:
- 4 point temperature and 4 point humidity scanner complete with sensors printer interface and facility to record, store and print data online and off line with variable print time intervals
- 8 channel temperature and 8 channel humidity scanner complete with sensors printer interface and facility to record, store and print data online and offline with variable print time intervals
- Labtopware CFR 21 part 11 compliance windows based communication software for data management
- Complete with RS-485 multi dropping to monitor multiple chambers to one software
- Ready to use stand by refrigeration system in case of the regular system fails
- Complete with compressor condenser, evaporator and other accessories with gas charging above 600 liters)
- Ready to use stand by humidity system in case of the regular system fails
- Mobile alert via GSM technology in case of system failure
- Additional tray suitable for the above equipment
- Online uninterrupted power supply for PLC
- Validation charges per day (8 hrs)
| BRAND | Labtop |
|---|
Write Your Own Review
