Dentsply Easypost Kit Fiber Posts - 1.0

Size: 1 mm
Composition:
Zirconium-Enriched Glass Fibers: 60%
Epoxy Resin Matrix: 40%
Flexural Strength: 1600 MPa
Length: 20 mm

In case of insufficient residual tooth substance (< 4 mm), the EasyPost is needed to support the coronal restoration.
Pre drilling with a Largo drill, no. 1 or no. 2, depending on the diameter (rotation speed 800-1200 rpm).
Precision drilling with the calibrating drill, no. 1, no. 2, no. 3, or no. 4, depending on the case (1000-2000 rpm).
Rinse and dry the canal.
Check positioning in mouth. Please keep a dentine collar of at least 2 mm around the preparation.
Draw the post outside the oral cavity using a diamond-tipped disc.
Clean and condition the dentine walls with EDTA for 1 minute.
Rinse with sodium hypochlorite then dry with air (multifunctional syringe) and large diameter paper points.
Clean the post with alcohol.
Adhere the tenon (silane does not need to be applied to the post): DENTSPLY Maillefer recommends using a compomer or composite luting cement such as Dyract Cem in conjunction with Prime & Bond + Self Cure. The post as well as the space and access cavity must be treated with Prime&Bond + Self Cure. Please follow the manufacturer’s instructions. The compomer or composite luting cement can be applied in the canal using a rotary paste filler (Lentulo).
Insert the post in the canal: please apply some pressure to ensure maximum adhesion.
Remove any excess.