Dentsply Aquasil Ultra XLV Refill Elastomeric Impression Material - Pack Size

Aquasil Ultra LV Smart Wetting Regular Set is a quadrafunctional hydrophilic addition reaction silicon, light-body, elastomeric impression material with excellent hydrophilic properties, dimensional accuracy, high tear strength and resistance to permanent deformation.

It has smart Wetting that improves both wetting on the tooth surface and model detail reproduction. It is available in cartridge delivery.

Aquasil Ultra is a Smart Wetting elastomeric impression material with excellent hydrophilic properties, dimensional accuracy, high tear strength and resistance to permanent deformation.

Aquasil Ultra XLV Wash materials are available in 50 ml cartridges for manual application as well as digit cartridges for single-use application.

Aquasil Ultra is a Quadra functional modified siloxane impression material which has superior hydrophilic properties, high tear strength, excellent dimensional accuracy, and resistance to deformation.

Aquasil Ultra regular-set has a working time of 2:30 and a set time of 5:00 from start of mix.

Indication:

• Impression of dental arches for fabrication of crown and bridges.

• Bite registration.

Advantages:

• Good wettability.

• Good surface detail.

• Easy to remove.

• Resistance to permanent deformation.

Package Contents: 4 x 50ml Cartridge

Length: 31 mm
Sizes Included: Assorted sizes 90, 100, 110, 120, 130, 140
Material: Stainless steel
Cross‑Section: Teardrop (Hedstroem design)
Cutting Action: Single‑direction filing on withdrawal stroke
File Type: Hedstroem (H) file

Preparation
Insert the cartridge into a compatible dispensing gun.
Bleed the cartridge before attaching a new mixing tip to ensure even flow.
Single-Phase Impression Technique
Achieve proper hemostasis and clean the field using an air-water spray.
Backfill the impression syringe or attach an intraoral tip to the mixing tip.
Dispense the material into the impression tray (do not overfill).
Simultaneously, syringe the material completely around the preparation/abutment.
Insert the loaded tray within 1 minute 10 seconds from the start of intraoral syringing.
Setting & Removal Time (Regular Set):
Minimum Removal Time:
5 minutes (Regular Set wash + tray material)
4 minutes when Regular Set Wash is used with Fast Set Tray material
Dual-Phase Two-Step (Putty-Wash) Technique
Make the primary impression using Aquasil Ultra Xtra Tray, Aquasil Putty, or Reprosil Tray material.
Place one or more polyethylene plastic sheets over the impression material to create uniform wash space and prevent contamination.
Insert the tray into the mouth and gently move it side-to-side and back-and-forth to create spacing.
Remove the tray once the material reaches a rubbery consistency and allow it to fully set undisturbed.
Remove the polyethylene sheet, rinse the impression with water, and air dry.
Simultaneously with tray loading, syringe the wash material completely around the preparation/abutment.
Reinsert the filled tray into the mouth.