3M RelyX Veneer Resin Luting Cement - Translucent (Pack of 1 Syringe)

Description:
The 3M RelyX Veneer Resin Luting Cement stands as a testament to precision and reliability in the realm of veneer cementation. Crafted with a focus on achieving natural aesthetics and long-lasting results, this resin luting cement is engineered to meet the specific demands of aesthetic dentistry.

Key Features:

1. Shade Adaptability:
   RelyX Veneer Cement offers a versatile range of shades, ensuring a seamless integration with natural tooth color variations. This adaptability allows for precise color matching, enhancing the aesthetic appeal of veneer restorations.

2. Low Film Thickness:
   The low film thickness of the cement facilitates accurate veneer placement, minimizing the need for occlusal adjustments. This characteristic not only ensures a precise fit but also helps in preserving the natural tooth structure.

3. Reliable Bonding Strength:
   Leveraging advanced adhesive technology, RelyX Veneer establishes a secure bond between the veneer and the tooth surface. This dependable bonding strength contributes to the longevity and stability of the veneer restoration.

Benefits:

1. Natural Aesthetics:
   With its nuanced shade options and translucency, RelyX Veneer Cement achieves a natural appearance that aligns with the expectations of both clinicians and patients. The result is a visually harmonious and lifelike smile.

2. Patient Comfort:
   The biocompatible nature of the cement prioritizes patient comfort during and after the veneer placement process. Reduced post-operative sensitivity ensures a positive and comfortable experience for individuals undergoing cosmetic dental procedures.

3. Efficient Application:
   RelyX Veneer's user-friendly handling characteristics streamline the veneer cementation process, allowing for precise placement and contouring. This efficiency supports a smooth workflow for clinicians, optimizing chairside procedures.

Film Thickness: 5-10 μm Flexural Strength: 123 Mpa Color Stability: Good Shade: Translucent Solubility: 0.3 μg/mm3 Water Sorption: 29 μg/mm3 Compressive Strength: 345.7 MPa Diametral Tensile Strength: 77.6 Depth of Cure: 3.0 mm

To use 3M™ ESPE™ RelyX™ Veneer Cement effectively for the permanent cementation of ceramic or composite veneers, follow these step-by-step directions: Materials Needed: RelyX Veneer Cement syringe (chosen shade) Appropriate bonding system (RelyX Ceramic Primer and Single Bond Dental Adhesive System or Scotchbond™ Multi-Purpose Dental Adhesive System) Curing light with a minimum output of 400 mW/cm² in the 400-500 nm wavelength range Mixing pad Applicator tips (if required) RelyX Try-In Paste (for shade selection, if needed) Procedure: Preparation: Ensure that the veneer restoration and tooth preparation are complete and clean. Verify that the restoration fits properly and is free from any debris. Shade Selection (Optional): If needed, use RelyX Try-In Paste to select the appropriate shade. Apply a small amount of the paste to the veneer and place it on the tooth to verify shade accuracy. Remove any excess paste. Adhesive Application: Apply the chosen bonding system (RelyX Ceramic Primer and Single Bond Dental Adhesive System or Scotchbond™ Multi-Purpose Dental Adhesive System) following the manufacturer's instructions. Allow it to set as directed. Cement Mixing: If the cement is not pre-mixed, dispense a small amount of RelyX Veneer Cement onto a mixing pad. Mix the cement thoroughly according to the manufacturer's recommendations. Ensure that it reaches a uniform consistency. Cement Placement: Load the mixed cement into a cement syringe. If the veneer is small, an applicator tip may be used for precise placement. Dispense the cement evenly on the internal surface of the veneer. Veneer Seating: Carefully position the veneer onto the prepared tooth. Ensure it is aligned correctly and press it into place. Excess cement may flow out. Curing: Use a curing light with a minimum output of 400 mW/cm² in the 400-500 nm wavelength range to cure the cement. Ensure that the light reaches all areas of the veneer for the recommended cure time (typically 30 seconds, but 40 seconds for A5/Dark shade). Excess Cement Removal: After curing, remove any excess cement with a suitable instrument. Pay particular attention to interproximal areas and margins to ensure a clean finish. Final Check: Verify that the veneer is securely in place and that there is no residual cement. Make any necessary adjustments for proper occlusion and esthetics. Post-Operative Care: Instruct the patient on post-operative care, including oral hygiene and any dietary restrictions, if necessary.