Waldent Distal End Cutter TC

Specifications:

• Waldent Wal-Orthodontics Distal End Cutter is capable of cutting the archwires upto 0.56 x 0.70mm/ 0.022" x 0.28" both intraoral and extraoral methods
• It is ideally used for cutting the distal end of the orthodontic wire emerging out of molar tubes
• It also has a safety mechanism to hold the cut archwire so that it doesn't fall into the patient's mouth
• Distal end cutter – a special plier used to cut off the ends of the arch wire.
• Shear cuts hard wire and then safely holds the loose distal end to prevent wire from going to tissue
• Cut wire upto 0.021 x 0.025
• Designed for intraoral cutting & lip safety
• Cuts wire close to the Buccal tube & safely holds the distal end
• Extremely safe plier for cutting distal wires in the patient’s mouth
• Cutting Edges are Diamond Toned

MAINTAINENCE INSTRUCTIONS:
• Must clean after every use with warm water to remove blood , tissues and mucus from the instruments
• Ultrasonic cleaning is recommended for all the instruments specially articulated instruments such as forceps, rongeurs, etc
• Use only standard and reputed brand of disinfectant solutions
STERILIZATION:
• We recommend that the temperature does not exceed 120C
• Dry heat sterilization see that temperature does not exceed 180C and there should be no long exposure as this would cause discoloration, loss of temper and this in turn would disturb the hardening of the instrument
• Do not use substandard chemicals or disinfectants as they can damage the instruments
• Avoid use of unsuitable highly acidic chlorine containing agents
• Use Demineralized water only
• Never rub an instrument with metal brush at the time of cleaning

Packaging

• 1 x Distal End Cutter

Warranty
• 6 Months warranty against Rust