Tanco Fume Hood (PLT-272 H) 4' x 2' x 2'
In stock
SKU
MBPL0296
Product Overview:
- Tanco Fume Hood is used for reducing or eliminate exposure to volatile liquids, dust, and mists. It is advisable to use a laboratory hood when working with all hazardous substances.
Specifications:
| Model No | FH 3 |
|---|---|
| Working Table Size | 4x2 ft |
| Working Size | 4x2x2 ft |
| No. Of Motor/Blower | 1 |
| Illumination | 1x40 W |
| Working Table Top | Fitted With Acid/Alkali Resistant Tile And Ss Sink Fitted With Swan Type Water Tap. |
| Front Door | Moves Vertically Up And Down With Concealed Counter Balanced Weight/By Hinges |
| Standard Accessory | Gas/Air Cock Fitted With 15/5 Amp Socket With Switches |
| Electric Supply | AC 230V , 50/60Hz |
| Optional Specifications: | |
| Storage Compartments | Mounting Base Below The Work Table With Storage Drawers And Door To Cost Extra |
| SS Lining On Working Walls | Done At An Extra Cost |
| Frplining On Working Walls | Done At An Extra Cost |
| Lead Lining On Working | WallsFor Use As Radio –Isotope Fume Hood |
| Duct Less Fume Hoods | Yes |
- Generates a negative pressure inside the hood
- Removal of all contaminants from the works area, into the atmosphere
- Basic material is thick board wood front back top
- Exterior surfaces are covered with formica
- Interior surfaces are sealed and checked for leakage
- Working area is illuminated by fluorescent lighting fitted to the unit
- Front door moves vertically up and down with concealed counterbalanced weight
- Blower and motor assembly is statically and dynamically balanced & operates
- Front-facing panel is fitted with 15/5 amp socket with switches for the exhaust system
- Low noise
- User-friendly ergonomic design
Write Your Own Review
