REMI Vortex Mixer - VM - 100
In stock
SKU
MBREMI0079
- The vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined 3.6mm eccentric orbit
- With vortexing greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility
- The circular groove around the top of the taller post allows the support plate to swing away from the tray for easy removal of samples
- The suction-cup feet dampen motion and prevent sliding on the work surface. Equipped with a powerful, permanent magnet motor with sealed ball bearings
- Accommodates full racks of tubes or microwell plates, vials or cylinder as opposed to single tubes
- Vortex mixer gives a distinctly different motion than shaking a sample
- A support plate is easily adjusted by loosening knobs and lifting the plate up and down
- Designed to hold the multiple test tubes, vials, or cylinders
- Useful for higher throughput mixing of samples
- Microprocessor control:
- The variable speed microprocessor control provides a consistent uniform mixing action
- LCD display:
- Touchpad controls with easy-to-read, independent LCDs for speed and time allow an operator to view both settings at once
- Provides repeatable and accurate results every time and is easily visible across lab benches
- A timer will display elapsed time or, when programmed to user-defined limit, will shut off unit when time reaches zero
- The display will show last used settings, even after power has been turned off
- Pulsing mode:
- Programmable pulsing mode allows a user to adjust the pulse-on and pulse-off times between 1 and 59 seconds in 1-second intervals
- This feature enhances the vortex action by creating a more vigorous mix
Product Overview:
- Remi Multi Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation.
Specifications:
| Model No. | VM-100 |
|---|---|
| Speed Range | 500 To 2500 |
| Timer | 1 sec To 160 Hrs. |
| Orbit | 3.6 mm |
| Maximum Weight Capacity | 24x15 ml |
| Duty Rating | Continuous |
| Tray Dimensions | 313x180 mm (LxW) |
| Overall Dimensions | 400 x 325 x 430 mm (WxDxH) |
| Supply | 220-240 Volts, 50 Hz. Single Phase |
| BRAND | Remi |
|---|
Write Your Own Review
