Fluke Impulse 7000DP Defibrillator Tester

Overview:

The Impulse 7000DP defibrillator AED analyzer ensures proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment, including mono- and bi-phasic defibrillators and AEDs. This best-in-class defibrillator analyzer offers test capabilities that encompass a global spectrum of established pulse shapes, feature breakthrough AED technology compatibility, and deliver superior performance with accuracy readings ± 1% of reading +0.1J.

The Impulse 7000DP model is a combination Defibrillator/Transcutaneous Pacemaker Analyzer with an intuitive user interface, backlight, and easy-to-read display. This portable, rugged, easy-to-carry device features functionality that includes energy output measurement, ECG waves, and an extensive range of test loads and measurement algorithms needed to test external transcutaneous pacemakers. The Impulse 7000DP coupled with the Impulse 7010 Defibrillator Selectable Load Accessory enables end-users to select from multiple loads (25Ω - 200Ω) ensuring IEC 60601-2-4 compliance.

The Impulse 7000DP features 10 independent ECG outputs that provide 12 lead combinations for standardized clinical signals.

Ansur test automation may be purchased in order to standardize test procedures, capture waveforms and test results, and evolve with increasing requirements for electronic data storage. 

Key Features

• IEC 60601-2-4 Compliance
• Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
• AED compatibility
• 12-lead ECG simulation
• Ability to test external transcutaneous pacemakers (Impulse 7000 DP only)
• Internal pacer brand selections
• Flexible heart-rate settings (1BPM step)
• DSP-based measurements for firmware and waveform upgrade
• Waveform capture, store and replay
• First-in-class accuracy ± 1% of reading + 0.1J
• Long-lasting, rechargeable battery

Specification:

• Temperature, Operating: 10 °C to 40 °C (50 °F to 104 °F)
• Temperature, Storage: -20 °C to +60 °C (-4 °F to +140 °F)
• Humidity: 10 % to 90 % non-condensing
• Display: LCD display
• Communications: USB device port for computer control
• Modes of Operation: Manual and remote
• Power: Internal rechargeable NiMH battery pack for nine hours (typical) operation after full charge or the battery charger can operate the analyzer and charge the battery simultaneously
• Battery Charger: 100 V to 240 V input, 15 V/1.5 V A output. For best performance, the battery charger should be connected to a properly grounded ac receptacle
• Enclosure: ABS plastic housing
• Dimensions: 32 cm x 24 cm x 13 cm (13 in x 9.5 in x 5 in)
• Weight :3.02 kg (6.6 lb, 0.1 oz)
• Safety Standards : CE: IEC/EN61010-1 2nd Edition; Pollution degree 2 CAN/CSA-C22.2 No. 61010-1; UL61010-1 C-Tick: Australian EMC

Feature:

• IEC 60601-2-4 Compliance
• Lown, Edmark, trapezoidal, biphasic and pulsed-biphasic defibrillation technology compatibility
• AED compatibility
• 12-lead ECG simulation
• Internal pacer brand selections
• Flexible heart-rate settings (1BPM step)
• DSP-based measurements for firmware and waveform upgrade
• Waveform capture, store and replay
• First-in-class accuracy ± 1% of reading + 0.1J
• Long-lasting, rechargeable battery

To place an order, please call Medikabazaar at +91-7045-917-407 or email: info@medikabazaar.com

For Purchasing this product visit https://medikabazaar.com/fluke-impulse-7000dp-defibrillator-tester